 |
 |
 |
|
The Copper and Brass Mini Verticale is a gorgeous looking machine that shows beauty in the beholder! Standing at 27 inches height, this gleaming beauty can make espresso as good as she looks. The dual purpose, brass boiler can extract quality espresso in 'coffee' mode, and the brass boiler can provide adequate steaming capability for making cappuccino and latte beverages. As with any espresso machine, practice to espresso extraction and frothing are essential! The power and coffee push buttons are on the left hand side, while the button to go to steam mode is on the right hand side. Once warmed up to steam mode, the steam knob on the right hand side can be turned to open the steam valve and allow steam to exit the steam wand for frothing/steaming milk.
Assembly required: Eagle needs to be attached to dome with screw, washer, and extender. Please note that each eagle has its own distinction, meaning that they are not perfect from the mold. In fact, these eagles are hand made and plated, and each one is different - just like real eagles.
Cup holding tray under dome fits demitasse cups only - although the tray offers some heat, we do not think any home espresso machine offers enough heat to properly warm up cups.
This machine is for home use only.
Paint remover can be used to remove the paint from copper and brass parts. Elektra uses varnish to paint the parts.
Elektra cups (pictured) are not included. The pictured cups serve only to demonstrate the cup warmer and drip tray.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Copper and brass with hand crafted mirror finishes
- Single brass boiler to ensure consistent results and longevity
- Continuous steam with virtually unlimited dry steam that makes it an excellent frother for perfect cappuccino and other coffee beverages that require milk foam
- Heavy construction. The coffee group alone weighs 5 lb for excellent heat retention
- Heat exchanger system with proper temperature to extract the most flavor from coffee bean
- Pump-operated to deliver water to group head and to refill boiler
- Three way solenoid valve allows quick removal of portafilter after espresso extraction.
- Removable drip tray and cover
- Finish: Copper body panels and Brass dome/base with clear coat finish only needs to be wiped with a damp terry cloth.
- Large water tank capacity with over half gallon (2 L)
- Removable parts can be hand washed
- Includes: one portafilter with bakelite handle and two spouts, one cup filter basket, two cup filter basket, plastic tamper, and plastic scoop.
- Large round base for optimal stability
- Dimensions: 27" H x 15" W x 15" D
- 1000 Watt, 110 Volts, 60 Hz
- Limited two-years warranty
- Made in Italy
|
|
|
|
|
|
|
|
|
Stay Connected!