If you are looking for a high performance espresso coffee grinder with micrometrical adjustment of the grinding burrs and available for the most demanding situation presented by an espresso fanatic, then this is the grinder for you.

MORE MACAP MC4 AVAILABLE HERE >>>

As with all coffee grinders, it is very important to only change grind settings on MACAP coffee grinders when the unit is powered 'on' and the burrs are in motion. If you do not do this, the burrs will "gunk" up and require cleaning by you every time this occurs. Changing the grind settings when the burrs are not in motion will render the grinder to only produce very coarse grinds or no grinds at all. If this result occurs, this will be considered operator error for lack of following directions, and not be classified as a defective grind

2. There are static issues with all grinders, even the highest quality models. We firmly believe that the static comes from the coffee beans. If you are having static problems with your coffee grinder, trying using a different blend of beans.

3. It is confirmed that MACAP tests EVERY grinder with coffee beans before it leaves their facility, but they are not always able to get every trace of coffee out of the grinders after testing. As a result, you may find coffee beans or grinds inside your grinder, or there may be grinds in the packaging when you unwrap it.

4. When replacing burrs, NEVER use a flathead screwdriver and hammer to wedge under the burrs for removal. This could badly damage your machine.